Shipping Policy
Description The pair of accessories ACCFS612V (ACC612V FS612V) is made up of a 12V Hella/DIN.4165 socket (BMW type – diameter 12 mm) and a 12V adapter for BC chargers. Thanks to its ring nut, the socket cah be installed on the dashboard/instrument panel, on a flank, on the number plate support or in any internal compartment of the vehicle. The installation is easy and with no possibility of mistake (polarity inversion, etc): you have to unfasten the socket from the wire, unscrew the fixing nut and insert it in a hole with a diameter of 18 mm (0.71 inches). Finally, fix the socket with the nut and restore the connection with the battery connector. The cable is realized with high quality materials specific for the use in the Automotive industry (resistance to oils, greases, atmospheric agents and thermic/mechanical stress guaranteed). The connector suitable to be employed in tough conditions is a guarantee of quality and endurance of the battery connecting system. The eyelets are dimensioned so that they adapt to the standards of every battery on the market (installed on motorbikes, motorcycles and light vehicles), but they can also be used for the permanent installation on medium/high capacity batteries (more than 40 Ah), inserting the eyelet in the screw of the clamps reaching the battery. If you install the accessory on a car, we recommend to fix the connector to the vehicle through a nylon strip. A protection fuse is installed on the cable to avoid any issue in case of short circuit.
